Why does my Dymo printer say offline

2022-06-22T05:59:00+00:00

Change Brother printer default settings on mac

Steps to change Brother printer default settings on mac or Apple. The default printer is the one displayed when the Print dialog box appears. If the message “No printer selected” appears in the Print dialog box, you need to add a new printer. The first Brother printer you add becomes the default printer, but you can change the printer at any time. Sometimes, the printer says offline do not respond due to the default setting of the mac printer.

How […]

2021-08-11T07:50:30+00:00

How do I connect my canon mg3500 printer to Wi-Fi

How to connect the canon mg3500 to Wi-Fi on a wireless network using a Windows computer and Wi-Fi protected setup or WPS. Make sure that your printer is plugged in and turned on the green light for connect canon printer to wifi. Next to the power button will be lit. When the printer is on press and hold the Wi-Fi button on the printer until the amber alarm light flashes.

Once  Wi-Fi button after the flash. Make sure the Wi-Fi light is flashing quickly […]

2022-07-27T05:13:22+00:00

How to connect canon mg3022 printer to computer

Are you trying to connect canon mg3022 printer on windows and mac operating system? Check the wireless Wi-Fi network connection and ensure printer and wireless network power is ON. Before, start check printer hardware and follow the further steps given below: Therefore, connect printer to wifi by following steps.

  1. To have a proper canon mg3022 wireless connection you must have a network name and password and a computer.
  2. A device in which you have a properly working internet connection.
  3. Make sure to turn […]
2022-01-11T05:09:59+00:00

Why is my Brother printer printing so slow

Fix Brother Printer Slow Printing from Windows. Resetting the printer can resolve some slow printing issues. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source. Wait 60 seconds.

Reconnect the power cord to the wall outlet and to the printer. The printer will turn on automatically. Print the document. If the issue persists, continue to the next step.

What to do when Brother printer receiving data but not printing

In Step 2, you’ll turn off Quiet […]

2021-07-16T06:54:41+00:00

Steps to fix when printer stopped due to error M999

Using 3d printer with repetier and how to Fix Printer Error M999. Try to adjust manually and fix printer error code to restart the printer. Set it after restarting).” The max temperature for my extrude is set at 195 but it never even begins to heat up when get the error. Sometimes, heater 0 maxtemp was not declared in this scope.

There are numerous reason behind the printer errors and this is not too common error but this is the […]

2021-07-14T07:48:06+00:00